Installation range: wooden floor, marble, ceramic tile, cement floor. Basic requirements: flatness within 2 m error less than 5 mm. The surface is uniform, no solid wheel track, crack, bad side, water, no sand.

Shop installs methods:
1. The shop installs the ground must level off, clean, no dust. 2. According to the floor of the Numbers them in chronological order, alignment, pay attention to in the process of merger shop to the field line alignment. 3. Along the GeFeng sanctions adjacent open two slices of floor, will manufacturers of professional connection with GeFeng place on the underside, in connection with the surface brushing glue. The first one board stuck half, and then the other connecting strap a board stuck in the rest of the connection, will close on crack can. (mobile installation) welding heat welding method bend-we suggest using force the company production of professional welding line, the floor before welding, first with manual or machine in the floor surface slot, lane slot place must clean up the temperature, heat welding is not lower than 300 ℃, and the automatic welding equipment or manual operation. Before the first official welding, with a short welding welding to test the temperature and speed of the appropriate. Weld after two steps, but remove excess welding. Use first crescent spade spade off raised portion of welding half, stay welding sufficient cooling, shovel to rest.